Mine's / ENGLISH TOP PAGE / CARBON FIBER / FULL CARBON SREIES / REAR WING

Made of carbon, it has the same form as the original and installment is easy as well (Bolt-on). The durability is high plus it is also 50% lighter than the stock Rear Wing Stay. The surface is painted with sapphire crystal so that it can be installed without incompatibility. Although this was originally installed for a N1 specified vehicle, its effects have been proven so we released it for commercial use. The effect is further brought out by combining its use with the rear wing stay. Carbon & Kevlar combination. By using Carbon Autoclave Twill as the material for the Rear Wing Stay completes the image of the Rear Wing Type 2. 　 　 We made the height 30mm (1.18inches)  higher than the normal rear wing stay. It can be rectified to increase the effect of the down force during high speeds or for increasing the rear field-of-view. The carbon material is used to achieve its lightweight. 　   　 By installing approx. 1cm garny to the end of the rear wing will generate the down force more effectively. It is also effective when the rear wing is in a horizontal state. In addition, by cutting both ends of the garny it will decrease drag. 　 The rear wing is fabricated from ultra-lightweight high quality dry carbon fibre.  By maintaining the stock design, and increasing the height by 30mm the down force and high speed stability is improved.  In addition, the clear coat finish protects the carbon from ultraviolet radiation. The design of the gurney creates the maximum amount of down force, improving cornering performance and high-speed stability without increasing drag.  *Installation is a simple bolt-on procedure. *Since this rear wing cannot incorporate the High Mount stop light, it is for circuit use only. 　 This collaborative product with Mine's know-how and Mooncraft's zenith design is made of high quality dry carbon twill with extremely lightweight and durability as well as aesthetically and creative gurney design with consideration of the aerodynamics. Furthermore, the clear coat finish protects the carbon from ultraviolet radiation, and plus this product can incorporate the High Mount stop light. Installation is simple and can be done with the use of included bolts and nuts. *This factory rear wing is not included in this product. *Design Patent Pending 　 CARBON REAR WING                                       Z34 REAR WING / GURNEY Car Make Stock Model Specifications NISSAN 　 SKYLINE GT-R* BCNR33 REAR WING STAY Autoclave carbon twill  with stop lamp hole. REAR WING TYPE 1 Autoclave carbon  & Carbon kevlar combination. REAR WING TYPE 2 Autoclave carbon twill. BNR34 REAR WING STAY Autoclave carbon twill  30mm UP REAR WING Autoclave carbon twill GT-R R35 REAR WING Dry carbon twill (Clear coat finish) REAR WING COVER Dry carbon twill(Clear coat finish) FAIRLADY Z Z34 REAR WING Carbon twill * Each carbon product is painted with sapphire crystal.